How to Tie a Tie? Know the Different Types of Tie Knots

How to Tie a Tie?

It's a sad fact, but there are such big people who do not know how to tie a tie. If they have a big interview in the afternoon, they will shop for clip-on. Even if a person knows how to tie, their knowledge is often limited to only one necktie knot. 

But there are several ways to tie the tie. Some neckties knots should be used with some shirt collars and used to wear the clothes to get the best result of their presence.

Below, I show you three classic necktie pit, every person should know and you should use it when you want to reduce it.

How to Tie the Four-In-Hand Tie Knot?

Also known as "school", this is probably the most widely used tie knot because it is so easy to tie if your tie is made of heavy materials then it is a good tie knot to use. Feeling the best with small spill collars.

1. Prepare the tie around your neck, the wide end of the tie should be 12 inches wide. Cross the wider portion of the tie on the narrow end.

2. Turn towards the broad end of the narrow end.

3. Continue it again to bring the wider end around the narrow end in front of the narrow end.

4. Pull the wide end up and down the loop.

5. Hold the tie knot front with your index finger and bring the wide end down through the front knot.

6. Tighten the lanes carefully by holding the narrow end n and sliding the knot.

How to Tie the Half-Windsor Tie Knot ?

This is the younger brother of Windsor tie knot, like Windsor, you have been left with a symmetrical triangle tie knot, but half Windsor is not in large form. This tie knot is suitable for light clothing and broad ties, with a standard collar.

1. Prepare the tie around your neck, the wide end of the tie should be 12 inches wide. Cross the wider portion of the tie on the narrow end.

2. Bring wide gap around narrow end and around.

3. Bring the wide end and drag it between the hole between your collar and the tie.

4. Bring wide gaps around the front, from the narrow end to the right to the left.

5. Bring back the wide end through the loop.

6. Pull down the wide end through the knot in front

7. Tighten the necktie knot and keep it in the center with both hands.

How to Tie the Full Windsor Tie Knot?

Windsor necktie knot gives you a wide triangular tie knot which is good for more formal settings. This tie knot is best worn with a wide spread collar.

1. Prepare the tie around your neck, the wide end of the tie should be 12 inches wide. Cross the wider portion of the tie on the narrow end.

2. Bring a wide end of tie-ups through the hole between your collar and tie. Then drag to the front

3. Bring wide gaps on the back and right side of the narrow end.

4. Drag the detailed end through the loop again. Now you should have a triangle where necktie knot will be.

5. Wide wide ends around the triangle by dragging from right to left to right.

6. Bring the wide end through the loop for the third time.

7. Pull wide end through knot in front

8. Tighten the knot and focus it with both hands.

How to Tie The Shelby Tie Knot ?

Shelby knot is a more obscure knot and was popularized by Ancarman don Shelby in the 1970s. It works best with extensive relationships, which are made of heavy materials.

1. Start with a tie around your neck around, wide end on the right.

2. Bring the detailed end under the narrow end.

3. Bring the wide end and drag it down through the loop between your neck and your tie. When you pull all the way up to the wider end, take it left

4. Bring the wide end to the knot on the right.

5. Pull the broad end through the loop between your neck and your tie.

6. Pull wide end threads and tight through knot. Center as needed